Do you want to reliably supply your modules in the control cabinet?
Choose from the comprehensive product range from Phoenix Contact.
• Single and three-phase power supply units with powers up to 1,000 W and integrated NFC interface for wireless parameterization
• DC/DC converters
• Redundancy modules for decoupling and monitoring power supplies connected in parallel.
Only we can offer groundbreaking functionality such as SFB (selective fuse breaking) technology and ACB (automatic current balancing) technology. You can therefore ensure maximum availability of your system.
High-performance QUINT power supplies ensure superior system availability. Individually adjust reporting thresholds and characteristic curves via the integrated NFC interface.
Power supplies for networks single-phase 230/400 V
• Output voltage: 24V/12-480 W
• Primary voltage adaptation +/- 15 V
• Fixing on 35 mm rail (up to 4 A)
• Output protection by integrated fuse (depending on model)
• LED display of primary and secondary voltage presence
Power supplies for 3-phase networks 400 V
• Output voltage: 24 V / 240-1440 W
• Primary voltage adaptation +/- 20 V
• Use of rated power up to +55°C without derating
• LED display of primary voltage presence
Benefits:
Bring energy to your automated systems!
The new generation of filtered rectified power supplies is used for supply of circuits not requiring output voltage regulation.
Their simple and proven technology enables them to offer greatly extended working life.
With this new offer, we proposes simplicity and ruggedness to serve your applications.
• SFB technology selectively trips standard circuit breakers, loads connected in parallel continue working
• Preventive function monitoring indicates critical operating states before errors occur
• Reporting thresholds and characteristic curves, which can be set via NFC, maximize system availability
• Easy system expansion through static boost, start difficult loads with dynamic boost
• High noise immunity, thanks to integrated gas-filled surge arrester and more than 20 ms mains failure buffer time
The performance and reliability of a power supply is critical to the operation of control systems. Phoenix Contact power supplies are designed to meet exceed the demands of modern control systems in general purpose. Industrial and even mission critical applications. The comprehensive approval package with CB scheme and UL approval simplifies international applications.
The power supply is also suitable for use in series machine manufacture. It offers basic functions at a very high level. The wide range input of 85-264V for Single Phase and 3X320-375AC for Three Phase AC enables worldwide use.
The MTBF of 500,000h as well as the dielectric strength up to 300V ensures a high operating reliability. Even at high operating temperatures up to 55°C, the devices delivery the nominal values. The power supply units can be connected in parallel to increase the capacity and redundancy.
The LED function monitoring simplifies the start-up. A third minus terminal simplifies the grounding on the secondary side. All power supply units are short circuit proof and provide a regulated and adjustable output voltage of 22.5VDC to 29.5VDC.
Benefits:
Bring energy to your automated systems!
The new generation of filtered rectified power supplies is used for supply of circuits not requiring output voltage regulation.
Their simple and proven technology enables them to offer greatly extended working life.
With this new offer, we proposes simplicity and ruggedness to serve your applications.
• Input Voltage Range : AC Only
• Output Voltage Range 24 VDC
• Current Rating Range : 2.5 – 40A
• 1 Phase & 3 Phase Version Available
• Power Boost Technologies
• Short Circuit Protection
• Surge Voltage Protection
• Potential Free Contacts
UNO POWER offers the ideal solution for loads up to 240 W, particularly in compact control boxes. The new product line sets new benchmarks in terms of low energy consumption.
Five designs – 17 devices
The UNO POWER product range offers performance classes ranging from 25 to 240 W at output voltages of 5 to 48 V DC.
UNO POWER allows input voltages from 85 to 264 V AC and functions reliably even in the event of voltage fluctuations in the power supply network. In the case of higher values from 264 to 575 V AC, the 2 AC device with 24 V and 90 W is used.
Two devices with the designation C2LPS are certified according to UL 1310/508 Listed Class 2 and are ideal for the Indian market.
UNO POWER – small, powerful, and up to 240 W
Do you need the greatest possible power in the least possible space? UNO POWER is now also available with an output power of 150 and 240 W. The output voltage can be set from 24 to 28 V DC via a potentiometer.
24 V DC/6.25 A for 150 W with an overall width of 37 mm
24 V DC/10 A for 240 W with an overall width of 45 mm
Maximum efficiency – low losses
When it comes to energy efficiency, UNO POWER leads the way. Compared with off-the-shelf products, it offers excellent energy savings, achieved through low idling losses of below 0.3 W and optimized efficiency. With over 90% efficiency at nominal load, just a very low amount of electrical energy is converted into unwanted heat energy.
• Save energy with idling losses below 0.3 W and over 90% efficiency
Benefits
Bring energy to your automated systems!
The new generation of filtered rectified power supplies is used for supply of circuits not requiring output voltage regulation.
Their simple and proven technology enables them to offer greatly extended working life.
With this new offer, we proposes simplicity and ruggedness to serve your applications.
• Save energy thanks to particularly low idling losses and high efficiency
• Narrow housing from 22.5 mm to 55 mm wide
• Design for all common 120 mm control cabinets with a housing depth of just 84 mm
• Robust and reliable at temperatures from -25 to 70°C
Flexible solution in modular electronics housing
Modular electronics housing (ME) has become standard in measurement and control technology. MINI POWER is the ideal power supply unit for this type of application. It gives your control cabinet a uniform appearance.
Flexible and easy maintenance
The devices are particularly flexible, thanks to special voltages and special versions, including a device for Ex applications.
Connection is extremely easy using COMBICON connectors from Phoenix Contact
Power supply unit and uninterruptible power supply in a single device
Uninterruptible power supplies (UPS) for 12 and 24 V DC output voltages are available in the same design.
• The UPS combines a power supply unit and an electronic switchover unit in the same housing.
• Various rechargeable battery modules ensure flexibility.
Rounded off with DC/DC converters
DC/DC converters complete the MINI POWER product range. They perform the following functions:
• Matching of voltage levels
• Regeneration of voltages on long cables
• Setup of independent supply systems
Benefits
Bring energy to your automated systems!
The new generation of filtered rectified power supplies is used for supply of circuits not requiring output voltage regulation.
Their simple and proven technology enables them to offer greatly extended working life.
With this new offer, we proposes simplicity and ruggedness to serve your applications.
• Ultra narrow in ME housing – ideal for use in measurement and control technology
• Flexible – numerous output voltages and versions available
• Active checking – switching output for monitoring the output voltage remotely
Use STEP POWER in your building automation: this range of power supplies from Phoenix Contact has been developed specifically for this application. The low idling losses and the high degree of efficiency ensure maximum energy efficiency.
Save energy in buildings.
STEP power supplies have been specifically designed for use in installation distributors. Low idling losses and the high degree of efficiency ensure optimum energy efficiency.
Maximum energy efficiency – low idling losses
STEP power supplies for installation distributors offer maximum energy efficiency and very low idling losses. This is thanks to a specially developed ASIC (application-specific integrated circuit).
High degree of efficiency
The ratio of the output real power to the input real power is anything up to 89% and therefore considerably higher than comparable devices. This means that STEP power supplies convert less electrical energy into undesired heat energy.
Long service life.
This not only saves energy, but also extends the service life of components.
Flexible Mounting
• STEP power supplies offer flexible mounting: they can either be snapped onto the DIN rail or screwed onto level surfaces.
• When mounting on level surfaces, lugs integrated into the housing eliminate the need for additional mounting material.
Benefits
Bring energy to your automated systems!
The new generation of filtered rectified power supplies is used for supply of circuits not requiring output voltage regulation.
Their simple and proven technology enables them to offer greatly extended working life.
With this new offer, we proposes simplicity and ruggedness to serve your applications.
• Save energy through low idling losses
• Outdoor installation: possible thanks to the wide temperature range from -25°C to 70°C
• Worldwide use, thanks to the wide-range input
• Flexible, as you can snap it onto the DIN rail or screw it onto a level surface
Copyright © 2016. Nascon Technologies. Developed and Managed by SME Business Services Ltd.
